NX 자료
NX 전체 환경변수
Author
tmold
Date
2017-02-09 12:02
Views
182
NX Environment Variables
The following are variables that can be set for NX as a system environment, startup script variable, or sometimes as a customer defaults file. The more common customer defaults file are used the less these variables will be relevant. Then these variables will be used for testing or debugging.
NX11에서 리본 메뉴 클래식메뉴로 바꾸는 방법
환경 변수 UGII_DISPLAY_DEBUG=1
NX 6 Added Variables
turn on / some of the legacy transformation options are not available in NX6.
*구형 이동, 복사 기능(Transform) 사용
UGII_ENABLE_TRANSFORM_LEGACY_OPTIONS = 1
turn on the new NX6 Hole Table creation in drafting
*Simplify Suface 기능 사용
UGII_Simplify_Surface=1
After Nx5.02 activate old Edit->Face functions
*Multi CPU 활용
Support for Multi Processor or Multi Core CPUs
UGII_SMP_ENABLE=1
*NX8 이상에서 아이콘 잘 안 보일때 사용
UGII_ALLOW_HIGH_COLOR_STANDARD_BITMAPS=1
Mouse wheel (since NX2) 마우스 휠 ZOOM In/out 방향 조정
**아래 기능은 NX9 까지만 적용 됨 -> NX10 이상에서는 Customer defaults -> Gateway -> View Operation 에서 조정
UGII_MOUSE_WHEEL=1 default, roll back to enlarge (기본 설정 NX 하위 버전과 동일 휠을 위로 올리면 작아 짐)
UGII_MOUSE_WHEEL=2 roll forward to enlarge
UGII_MOUSE_WHEEL=0 inactive mouse wheel, no zoom
Where should execute NX/Open application directory look by default
UGII_DRAFTING_HOLE_TABLE=1
NX 5 Added or Depricated Variables
Enable the Class Selection Dialog Removes the floating dialog class selection and goes straight to the advanced class selection dialog
NX_FORCE_CSD=1
Point to the directories with the template and pax files (File\New)
UGII_TEMPLATE_DIR=<path>
Enable on extra Nx5.02 Replace Face Option
UGII_DMX_NX502=1
don't cache WAVE specific information
UGII_DONT_CACHE_WAVE_LINK_DATA=1
Variable to Aid With “Out of Memory” Errors on Large Assemblies
UGII_CLOSE_UNDO_MODE=CHECK
NX 4 Added or Depricated Variables
Visually see the coverage of a Journaling when creating a Journal file
UGII_JOURNAL_INDICATOR=1
Enable view dynamics under the function keys (F1 -> F4)
UGII_FKEY_DYNAMICS=1
Required to load the Solid Edge V19 adapter when Solid Edge parts are opened in NX4.0.2
UGII_USE_SEV19=1
NX 3 Added or Depricated Variables
Store user customizations
UGII_LOCAL_USER_DEFAULTS=<path>\nx3_user.dpv
Nastavuje defaultni roli (Role) , *.mtx soubor musi byt ve slo?ce ugii\menus\roles\
UGII_DEFAULT_ROLE=example.mtx
Location of the user.mtx file Store nx_mru.txt file for folding of menus
UGII_USER_PROFILE_DIR=<path>
Save history.pax palette file in a specific location
UGII_HISTORY_PALETTE_DIR=<path>
Turn of folded menus and prevent recording actions
UGII_NO_FOLDED_MENUS=1
Default location for interactively created palettes
UGII_PALETTE_WORK_DIR=<path>
NX to perform an interactive drawing refile on part load
UGII_DRAFT_DRAWING_UPGRADE=1
Enable the Class Selection Dialog
NX_FORCE_CSD=1
Disable splash on start of a NX session
UGII_DISABLE_FLASH=YES
Enable the drawing compare (the hpgl output) function under file -> utilities ->
UGII_ALLOW_DRAWING_COMPARE=1
Base Environment Variables
Not sure which version it was first released in but they have been in NX for a while.
Mouse wheel (since NX2)
UGII_MOUSE_WHEEL=1 default, roll back to enlarge
UGII_MOUSE_WHEEL=2 roll forward to enlarge
UGII_MOUSE_WHEEL=0 inactive mouse wheel, no zoom
Where should execute NX/Open application directory look by default
UGII_INITIAL_UFUN_DIR=
Allow for opening of Solid Edge Assemblies
UGII_SE_INTEROP=1
All the expression? editor to be viewed in Drafting
UGII_DRAFT_EXPRESSIONS_OK=1
Required for interoperability to function between Solid Edge and NX
UGII_MONIKER=1
NX Location
UGII_BASE_DIR=C:\PROGRA~1\UGS\NX4~1.0\
UGII_ROOT_DIR=%UGII_BASE_DIR%UGII\
Point to the application directory instead of custom_dirs.dat
UGII_USER_DIR=<path>
Set Custom Directory Location
UGII_CUSTOM_DIRECTORY_FILE=<path>\custom_dirs.dat
set part family member directory
UGII_INITIAL_FAMILY_INSTANCE_DIR=%folder%
Enable class selection on the graphics display dialog bars
UGII_CSD_ON_DIALOG_BAR=1
Enable class selection on the selection toolbar
UGII_CSD_ON_TOOLBAR=1
Text file to map directories between windows and unix
UGII_DIRECTORY_MAP_FILE=<path to file>
Prevents the syslog from being removed from temp
UGII_KEEP_SYSTEM_LOG=1
File difference time tolerance
UGII_MODIFICATIONS_TIME_TOLERANCE=60
Prevents NX from defaulting to sketch on face when extruding Customer Defaults: Modeling->Extras->Sketch on Planar Faces
UGII_SECTION_USE_PLANAR_FACE=1
Default location of your pattern files
UGII_PATDIR=<path>
Creates a new parts list from a template
UGII_DEFAULT_PARTS_LIST=<path>
Remove unsupported characters from text in drafting
UGII_DRAFT_REMOVE_UNSUPPORTED_CONTROL_CHARACTERS=TRUE
Enable symbolic thread performance improvements
UGII_DRAFT_SUPPRESS_THREAD_TRUE_HIDDEN_LINE=1
Force Parts lists to Upper Case
UGII_FORCE_PLIST_AUTO_TEXT_TO_UPPER_CASE=1
Prevent Internal pars list from being used for Insert->Parts List
UGII_IGNORE_INTERNAL_PLIST=1
Delay View Updates preference can be saved with the part file, this overrides that setting
UGII_SUPPRESS_VIEW_UPDATE=1
Enable Surface Finish symbols in drafting
UGII_SURFACE_FINISH=ON
Defining a user defined location for custom symbols
UGII_SYMBOL_LIBRARY_DIR=<path>
User Defined Directory for Table Templaces defined by pax files
UGII_TABLE_TEMPLATES=<path>
Allows user defined balloon symbols to be applied to assembly drawings
UGII_UPDATE_ALL_ID_SYMBOLS_WITH_PLIST=1
Activate the weld symbols utility for drafting
UGII_WELD_SYMBOL=ON
Converts promotions to WAVE geometry
UGII_CONVERT_PROMOTION_TO_LINKED_BODY=1
turn off preview generation for all component Previews will still be generated for the Work and Display part
UGII_DISABLE_COMPONENT_PREVIEWS=TRUE
Disable the generation of preview images under all circumstances
UGII_DISABLE_PREVIEW=ON
Overrides customer defaults or the Save Options to always save trueshape data
UGII_FORCE_TRUESHAPE_SAVE=1
Reverts to old style if internal errors received when adding a component to an assembly
UGII_OLD_STYLE_STAGING_VIEW=YES
disable part preview in Open Part file
UGII_SHOW_PART_PREVIEW=OFF
Allows JT assemblies to be opened as an assembly
UGII_JT_ASSY_STRUCTURE=1
auto update for parts lists will not be turned off in NX/Manager mode
UGII_UGMGR_PLIST_ALLOW_AUTO_UPDATE=1
point UG to the install path of Process Aid Wizard
UGPROCESS_AID=<path>
Enable Weld Assistant Required for weld assistant. Points UG to the install directory for weld assistant. E.g: D:\Program Files\EDS\Unigraphics NX\UGWELD
UGWELD_DIR=<path>
Helpfull Part Attributes
-->File->Preferences
If attribute exists on a component then component is excluded by all parts list
PLIST_IGNORE_MEMBER=1
If attribute exists on a component then that component and all of its children is excluded
PLIST_IGNORE_SUBASSEMBLY=1
If attribute exists on a component will not intersected and shown with no crosshatching in drafting section view
SECTION-COMPONENT=NO
The following are variables that can be set for NX as a system environment, startup script variable, or sometimes as a customer defaults file. The more common customer defaults file are used the less these variables will be relevant. Then these variables will be used for testing or debugging.
NX11에서 리본 메뉴 클래식메뉴로 바꾸는 방법
환경 변수 UGII_DISPLAY_DEBUG=1
NX 6 Added Variables
turn on / some of the legacy transformation options are not available in NX6.
*구형 이동, 복사 기능(Transform) 사용
UGII_ENABLE_TRANSFORM_LEGACY_OPTIONS = 1
turn on the new NX6 Hole Table creation in drafting
*Simplify Suface 기능 사용
UGII_Simplify_Surface=1
After Nx5.02 activate old Edit->Face functions
*Multi CPU 활용
Support for Multi Processor or Multi Core CPUs
UGII_SMP_ENABLE=1
*NX8 이상에서 아이콘 잘 안 보일때 사용
UGII_ALLOW_HIGH_COLOR_STANDARD_BITMAPS=1
Mouse wheel (since NX2) 마우스 휠 ZOOM In/out 방향 조정
**아래 기능은 NX9 까지만 적용 됨 -> NX10 이상에서는 Customer defaults -> Gateway -> View Operation 에서 조정
UGII_MOUSE_WHEEL=1 default, roll back to enlarge (기본 설정 NX 하위 버전과 동일 휠을 위로 올리면 작아 짐)
UGII_MOUSE_WHEEL=2 roll forward to enlarge
UGII_MOUSE_WHEEL=0 inactive mouse wheel, no zoom
Where should execute NX/Open application directory look by default
UGII_DRAFTING_HOLE_TABLE=1
NX 5 Added or Depricated Variables
Enable the Class Selection Dialog Removes the floating dialog class selection and goes straight to the advanced class selection dialog
NX_FORCE_CSD=1
Point to the directories with the template and pax files (File\New)
UGII_TEMPLATE_DIR=<path>
Enable on extra Nx5.02 Replace Face Option
UGII_DMX_NX502=1
don't cache WAVE specific information
UGII_DONT_CACHE_WAVE_LINK_DATA=1
Variable to Aid With “Out of Memory” Errors on Large Assemblies
UGII_CLOSE_UNDO_MODE=CHECK
NX 4 Added or Depricated Variables
Visually see the coverage of a Journaling when creating a Journal file
UGII_JOURNAL_INDICATOR=1
Enable view dynamics under the function keys (F1 -> F4)
UGII_FKEY_DYNAMICS=1
Required to load the Solid Edge V19 adapter when Solid Edge parts are opened in NX4.0.2
UGII_USE_SEV19=1
NX 3 Added or Depricated Variables
Store user customizations
UGII_LOCAL_USER_DEFAULTS=<path>\nx3_user.dpv
Nastavuje defaultni roli (Role) , *.mtx soubor musi byt ve slo?ce ugii\menus\roles\
UGII_DEFAULT_ROLE=example.mtx
Location of the user.mtx file Store nx_mru.txt file for folding of menus
UGII_USER_PROFILE_DIR=<path>
Save history.pax palette file in a specific location
UGII_HISTORY_PALETTE_DIR=<path>
Turn of folded menus and prevent recording actions
UGII_NO_FOLDED_MENUS=1
Default location for interactively created palettes
UGII_PALETTE_WORK_DIR=<path>
NX to perform an interactive drawing refile on part load
UGII_DRAFT_DRAWING_UPGRADE=1
Enable the Class Selection Dialog
NX_FORCE_CSD=1
Disable splash on start of a NX session
UGII_DISABLE_FLASH=YES
Enable the drawing compare (the hpgl output) function under file -> utilities ->
UGII_ALLOW_DRAWING_COMPARE=1
Base Environment Variables
Not sure which version it was first released in but they have been in NX for a while.
Mouse wheel (since NX2)
UGII_MOUSE_WHEEL=1 default, roll back to enlarge
UGII_MOUSE_WHEEL=2 roll forward to enlarge
UGII_MOUSE_WHEEL=0 inactive mouse wheel, no zoom
Where should execute NX/Open application directory look by default
UGII_INITIAL_UFUN_DIR=
Allow for opening of Solid Edge Assemblies
UGII_SE_INTEROP=1
All the expression? editor to be viewed in Drafting
UGII_DRAFT_EXPRESSIONS_OK=1
Required for interoperability to function between Solid Edge and NX
UGII_MONIKER=1
NX Location
UGII_BASE_DIR=C:\PROGRA~1\UGS\NX4~1.0\
UGII_ROOT_DIR=%UGII_BASE_DIR%UGII\
Point to the application directory instead of custom_dirs.dat
UGII_USER_DIR=<path>
Set Custom Directory Location
UGII_CUSTOM_DIRECTORY_FILE=<path>\custom_dirs.dat
set part family member directory
UGII_INITIAL_FAMILY_INSTANCE_DIR=%folder%
Enable class selection on the graphics display dialog bars
UGII_CSD_ON_DIALOG_BAR=1
Enable class selection on the selection toolbar
UGII_CSD_ON_TOOLBAR=1
Text file to map directories between windows and unix
UGII_DIRECTORY_MAP_FILE=<path to file>
Prevents the syslog from being removed from temp
UGII_KEEP_SYSTEM_LOG=1
File difference time tolerance
UGII_MODIFICATIONS_TIME_TOLERANCE=60
Prevents NX from defaulting to sketch on face when extruding Customer Defaults: Modeling->Extras->Sketch on Planar Faces
UGII_SECTION_USE_PLANAR_FACE=1
Default location of your pattern files
UGII_PATDIR=<path>
Creates a new parts list from a template
UGII_DEFAULT_PARTS_LIST=<path>
Remove unsupported characters from text in drafting
UGII_DRAFT_REMOVE_UNSUPPORTED_CONTROL_CHARACTERS=TRUE
Enable symbolic thread performance improvements
UGII_DRAFT_SUPPRESS_THREAD_TRUE_HIDDEN_LINE=1
Force Parts lists to Upper Case
UGII_FORCE_PLIST_AUTO_TEXT_TO_UPPER_CASE=1
Prevent Internal pars list from being used for Insert->Parts List
UGII_IGNORE_INTERNAL_PLIST=1
Delay View Updates preference can be saved with the part file, this overrides that setting
UGII_SUPPRESS_VIEW_UPDATE=1
Enable Surface Finish symbols in drafting
UGII_SURFACE_FINISH=ON
Defining a user defined location for custom symbols
UGII_SYMBOL_LIBRARY_DIR=<path>
User Defined Directory for Table Templaces defined by pax files
UGII_TABLE_TEMPLATES=<path>
Allows user defined balloon symbols to be applied to assembly drawings
UGII_UPDATE_ALL_ID_SYMBOLS_WITH_PLIST=1
Activate the weld symbols utility for drafting
UGII_WELD_SYMBOL=ON
Converts promotions to WAVE geometry
UGII_CONVERT_PROMOTION_TO_LINKED_BODY=1
turn off preview generation for all component Previews will still be generated for the Work and Display part
UGII_DISABLE_COMPONENT_PREVIEWS=TRUE
Disable the generation of preview images under all circumstances
UGII_DISABLE_PREVIEW=ON
Overrides customer defaults or the Save Options to always save trueshape data
UGII_FORCE_TRUESHAPE_SAVE=1
Reverts to old style if internal errors received when adding a component to an assembly
UGII_OLD_STYLE_STAGING_VIEW=YES
disable part preview in Open Part file
UGII_SHOW_PART_PREVIEW=OFF
Allows JT assemblies to be opened as an assembly
UGII_JT_ASSY_STRUCTURE=1
auto update for parts lists will not be turned off in NX/Manager mode
UGII_UGMGR_PLIST_ALLOW_AUTO_UPDATE=1
point UG to the install path of Process Aid Wizard
UGPROCESS_AID=<path>
Enable Weld Assistant Required for weld assistant. Points UG to the install directory for weld assistant. E.g: D:\Program Files\EDS\Unigraphics NX\UGWELD
UGWELD_DIR=<path>
Helpfull Part Attributes
-->File->Preferences
If attribute exists on a component then component is excluded by all parts list
PLIST_IGNORE_MEMBER=1
If attribute exists on a component then that component and all of its children is excluded
PLIST_IGNORE_SUBASSEMBLY=1
If attribute exists on a component will not intersected and shown with no crosshatching in drafting section view
SECTION-COMPONENT=NO
Total Reply 0


